Reliance Industries Limited Graduate Engineer Trainee (GET) Interview Questions & Experience Guide
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: [Not specified]
Application Process: I applied via Reliance’s official portal and was interviewed in October 2023.
Interview Rounds:
-
Round 1 - Aptitude Test Round:
- Questions Asked: General aptitude questions.
- Your Approach: I brushed up on basic quantitative, logical, and verbal reasoning skills beforehand.
- Outcome: Cleared the round successfully.
-
Round 2 - Technical Round:
- Questions Asked:
- Questions from various engineering subjects.
- Specific questions on Thermodynamics and Heat Transfer.
- Your Approach: I revised core engineering concepts, especially Thermodynamics and Heat Transfer, and practiced problem-solving.
- Outcome: Advanced to the next round.
- Questions Asked:
-
Round 3 - One-on-one Round:
- Questions Asked:
- Detailed discussion about my final year project and questions from my favorite subject (as mentioned earlier).
- Questions on Fluid Mechanics and Turbomachinery.
- Your Approach: I prepared thoroughly for my final year project presentation and revised Fluid Mechanics and Turbomachinery concepts.
- Outcome: Successfully cleared the round.
- Questions Asked:
Preparation Tips:
- Focus on core engineering subjects, especially Thermodynamics, Heat Transfer, Fluid Mechanics, and Turbomachinery.
- Revise your final year project details thoroughly.
- Practice aptitude questions to improve speed and accuracy.
Conclusion:
Overall, the interview process was smooth and well-structured. I felt confident because I had prepared well for both technical and aptitude rounds. For future candidates, I’d recommend focusing on core subjects and being clear about your project details. Communication skills are also crucial, so practice explaining concepts concisely.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: Dr. B.R. Ambedkar National Institute of Technology (NIT), Jalandhar
Application Process: Applied via campus placement at NIT Jalandhar in December 2022.
Interview Rounds:
-
Round 1 - Aptitude Test:
- Questions Asked:
- Aptitude section: General aptitude questions.
- Technical section: Questions related to Chemical Engineering (Fluid Mechanics, Heat and Mass Transfer, Thermodynamics).
- Your Approach: Focused on revising core Chemical Engineering subjects and practiced aptitude questions.
- Outcome: Cleared the round successfully.
- Questions Asked:
-
Round 2 - One-on-one Interview:
- Questions Asked:
- General introduction.
- What is the state when there is no effect of pressure in a pipeline?
- How to calculate the number of trays in a distillation column?
- Explain MSDS and HAZOP. Also, create an MSDS for cardboard and specify where it would be used in the industry.
- What is a relief valve, and where is it used?
- Your Approach: Answered confidently, drawing from academic knowledge and practical understanding of Chemical Engineering concepts.
- Outcome: Provided clear and concise answers, which were well-received.
- Questions Asked:
Preparation Tips:
- Focus on core subjects like Fluid Mechanics, Heat and Mass Transfer, and Thermodynamics.
- Practice aptitude questions to improve speed and accuracy.
- Be prepared to explain technical concepts with real-world applications.
Conclusion:
The interview process was smooth, and the questions were aligned with my field of study. I felt well-prepared, but revising more practical applications of theoretical concepts could have been beneficial. For future candidates, I recommend a thorough review of core subjects and practicing problem-solving under time constraints.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: Nagpur (via campus placement at VNIT)
Application Process: Applied through campus placement at Visvesvaraya National Institute of Technology (VNIT), Nagpur, in December 2022.
Interview Rounds:
-
Round 1 - Aptitude Test:
-
Questions Asked: Aptitude test had two sections: aptitude and domain knowledge. The criteria to clear this round was generally around 60% of the marks.
-
Your Approach: Focused on solving the aptitude questions quickly and accurately, while ensuring a good grasp of domain-specific basics.
-
Outcome: Cleared the round by meeting the required criteria.
-
Round 2 - Technical Round:
-
Questions Asked:
- Draw the Iron-Carbon Diagram and explain austenite and its practical applications.
- Project-related questions (e.g., Hydrogen Embrittlement on stainless steel).
- Corrosion and its types, with a focus on explaining one type in detail.
- Types of testing, especially Non-Destructive Testing.
-
Your Approach: Prepared thoroughly by revising core concepts, especially the Iron-Carbon Diagram and corrosion types. For project questions, I explained my work clearly and confidently.
-
Outcome: Performed well by demonstrating a strong understanding of technical concepts.
Preparation Tips:
- The interview was not overly difficult. Confidence and a clear understanding of basic concepts in your field are key.
- Interviewers are friendly, and fluency in English is not mandatory as long as you can convey your ideas clearly.
Conclusion:
Overall, the experience was positive. The key to success was staying calm and being well-prepared with fundamental concepts. For future candidates, I’d recommend focusing on core subjects and practicing clear communication.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: National Institute of Technology (NIT), Jamshedpur
Application Process: Applied via campus placement at NIT Jamshedpur in November 2022.
Interview Rounds:
-
Round 1 - Aptitude Test:
- Questions Asked: The test included sections on Quantitative Analysis, Reasoning, and Technical questions.
- Your Approach: Focused on solving quantitative and reasoning problems quickly while ensuring accuracy. For technical questions, relied on core engineering concepts.
- Outcome: Cleared the round successfully.
-
Round 2 - One-on-One Interview:
- Questions Asked:
- Tell me about yourself?
- Tell me about your project?
- What do you mean by Transistors?
- Mention some types of transistors and their applications.
- What is the difference between SCR and GTO?
- What do you mean by controllers?
- Your Approach: Answered confidently, providing clear and concise explanations. For technical questions, elaborated with examples and practical applications.
- Outcome: Performed well and received positive feedback.
- Questions Asked:
Preparation Tips:
- Be thorough with the basics of your core subjects.
- Research the company and its operations beforehand to align your answers with their expectations.
- Practice common interview questions to build confidence.
Conclusion:
The interview process was smooth and well-structured. Preparing core concepts and being confident in my responses helped me perform well. For future candidates, I’d recommend focusing on both technical and soft skills to ace the interview.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: Indira Gandhi Institute of Technology, Dhenkanal
Application Process: Applied via campus placement at Indira Gandhi Institute of Technology, Dhenkanal in August 2023.
Interview Rounds:
-
Round 1 - Aptitude Test:
-
Questions Asked: Aptitude as well as core subject questions.
-
Your Approach: Focused on solving aptitude problems quickly and accurately while ensuring core subject knowledge was solid.
-
Outcome: Cleared the round successfully.
-
Round 2 - Technical Round:
-
Questions Asked: Core subject questions and details about projects.
-
Your Approach: Prepared thoroughly on core subjects like Mass Transfer Operation, Heat Transfer, Fluid Mechanics, and Thermodynamics. Discussed projects in detail to showcase practical knowledge.
-
Outcome: Performed well and advanced to the next round.
-
Round 3 - HR Round:
-
Questions Asked: Tell us about yourself, your strengths and weaknesses, and where you see yourself in 5 years.
-
Your Approach: Answered confidently, highlighting strengths relevant to the role and being honest about weaknesses while showing a plan for improvement.
-
Outcome: Successfully cleared the HR round.
Preparation Tips:
- Focus on core subjects like Mass Transfer Operation, Heat Transfer, Fluid Mechanics, and Thermodynamics.
- Revise project details thoroughly to discuss them confidently.
- Practice aptitude questions to improve speed and accuracy.
- Prepare for common HR questions like self-introduction, strengths, weaknesses, and career goals.
Conclusion:
The overall interview experience was smooth and well-structured. Preparing core subjects and projects in advance helped a lot. For future candidates, I’d recommend focusing on both technical and aptitude sections equally and being confident during the HR round.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: [Not specified]
Application Process: Applied via the company’s official website in March 2024.
Interview Rounds:
- Round 1 - Aptitude Test:
- Questions Asked: The test covered aptitude, reasoning, technical questions, mathematics, and industrial knowledge.
- Your Approach: Prepared using general aptitude and reasoning resources, along with brushing up on technical concepts relevant to the role.
- Outcome: [Result not specified]
Preparation Tips:
- Focus on aptitude and reasoning skills, as they form a significant part of the test.
- Review technical concepts related to the role, such as field service, IT, installation, and industrial operations.
- Practice problem-solving and time management for the test.
Conclusion:
The interview process was straightforward, with a strong emphasis on aptitude and technical knowledge. Future candidates should ensure they are well-prepared in these areas to perform well in the test.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: Pune University (Campus Placement)
Application Process: Applied via campus placement at Pune University before June 2023.
Interview Rounds:
-
Round 1 - Aptitude Test:
- Questions Asked: Topics included logical reasoning and quantitative sections like ratio proportion, average, boat and train problems, decoding, syllogism, etc.
- Your Approach: Focused on practicing basic aptitude problems and timed mock tests to improve speed and accuracy.
- Outcome: Cleared the round successfully.
-
Round 2 - Technical Interview:
- Questions Asked:
- Introduce yourself.
- Tell me in brief about your final year engineering project.
- Describe your industrial visit and the equipment you saw.
- Types of cooling towers and their differences.
- What is wet bulb temperature and where is it used?
- Types of pumps.
- What is cavitation? How can we avoid it?
- Types of valves.
- Your Approach: Prepared thoroughly on core engineering topics, especially fluid mechanics, heat transfer, and thermodynamics. Also, rehearsed my project details and industrial visit experiences.
- Outcome: Performed well and received positive feedback.
- Questions Asked:
Preparation Tips:
- Focus on core engineering subjects like Fluid Mechanics, Heat Transfer, Mass Transfer, and Thermodynamics.
- Practice aptitude questions regularly to improve speed and accuracy.
- Be ready to discuss your projects and industrial visits in detail.
Conclusion:
Overall, the interview process was smooth and well-structured. Preparing core subjects and practicing aptitude questions helped me perform well. For future candidates, I’d recommend revising fundamental engineering concepts and staying confident during the interview.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: [Location not specified]
Application Process: Applied via campus placement in December 2022.
Interview Rounds:
-
Round 1 - Resume Shortlist:
- Questions Asked: Resume was reviewed for shortlisting.
- Your Approach: Ensured the resume was crisp and highlighted relevant skills and experiences.
- Outcome: Successfully shortlisted for the next round.
-
Round 2 - Aptitude Test:
- Questions Asked: Basic questions about Quants, English, Logical Reasoning, and core-related topics.
- Your Approach: Prepared by revising fundamental concepts and practicing sample questions.
- Outcome: Cleared the aptitude test.
-
Round 3 - Technical Round:
- Questions Asked:
- Tell me about your internship.
- Questions from CV and application form.
- Your Approach: Provided detailed answers about my internship experience and ensured all details in my CV and application form were accurate and well-explained.
- Outcome: Successfully cleared the technical round.
- Questions Asked:
Preparation Tips:
- Keep good communication skills and be confident.
- Study your CV thoroughly and fill out the employment form carefully.
Conclusion:
Overall, the interview process was smooth, and the key to success was being well-prepared and confident. I would advise future candidates to focus on their CV details and practice aptitude and technical questions relevant to the role.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: National Institute of Technology (NIT), Durgapur
Application Process: I applied via campus placement at NIT Durgapur in October 2022.
Interview Rounds:
-
Round 1 - Resume Shortlist:
-
Questions Asked: Resume screening to shortlist candidates.
-
Your Approach: Ensured my resume was concise and highlighted relevant skills and projects.
-
Outcome: Successfully shortlisted for the next round.
-
Round 2 - Aptitude Test:
-
Questions Asked: Basic aptitude questions from Indiabix and technical questions (50 questions in 30 minutes).
-
Your Approach: Focused on time management and prioritized answering questions I was confident about.
-
Outcome: Cleared the aptitude test.
-
Round 3 - Technical Interview:
-
Questions Asked:
- Introduction, favorite subjects.
- Distillation tower components, optimization, number of trays calculation.
- Types and applications of heat exchangers (HEs).
- Why manufacturing?
- LMTD, reboiler LMTD, heat transfer coefficient, thermal conductivity.
- Perry’s handbook.
- Deep discussion on projects.
- Compression ratio.
- Heat exchangers fluid allocation.
- Some HR questions interspersed.
-
Your Approach: Answered confidently, linked answers to my academic background and projects.
-
Outcome: Successfully cleared the technical round.
Preparation Tips:
- Practice basic aptitude questions from Indiabix.
- Revise core engineering subjects, especially those related to the role.
- Be thorough with your projects and their applications.
- Time management is crucial for the aptitude test.
Conclusion:
Overall, the interview process was smooth and well-structured. Reliance is a great place to start your career, offering ample learning opportunities. My advice to future candidates is to focus on core concepts, manage time efficiently during tests, and be confident during interviews.
Company Name: Reliance Industries Limited
Position: Graduate Engineer Trainee (GET)
Location: National Institute of Technology (NIT), Durgapur
Application Process: Applied via campus placement at NIT Durgapur in October 2022.
Interview Rounds:
-
Round 1 - Resume Shortlist:
-
Questions Asked: Resume screening to shortlist candidates.
-
Your Approach: Ensured my resume was concise and highlighted relevant skills and projects.
-
Outcome: Successfully shortlisted for the next round.
-
Round 2 - Aptitude Test:
-
Questions Asked: Basic aptitude questions (similar to those on Indiabix) and technical questions covering fundamental concepts.
-
Your Approach: Focused on time management, especially for the technical section (50 questions in 30 minutes).
-
Outcome: Cleared the aptitude test and moved to the technical round.
-
Round 3 - Technical Interview:
-
Questions Asked:
- Introduction, favorite subjects.
- Distillation tower components, optimization, number of trays calculation.
- Types and applications of heat exchangers (HEs).
- Why manufacturing?
- LMTD (Log Mean Temperature Difference), reboiler LMTD, heat transfer coefficient, thermal conductivity.
- Perry’s handbook.
- Deep discussion on projects.
- Compression ratio.
- Fluid allocation in heat exchangers.
- Some HR questions interspersed during the interview.
-
Your Approach: Prepared thoroughly on core engineering concepts, especially heat transfer and distillation. Discussed projects in detail and linked them to practical applications.
-
Outcome: Successfully cleared the technical round.
Preparation Tips:
- Focus on fundamental engineering concepts, especially those related to your field.
- Practice aptitude questions from reliable sources to improve speed and accuracy.
- Be ready to discuss your projects in depth and relate them to real-world applications.
Conclusion:
Overall, the interview process was thorough but fair. Reliance Industries is a great place to start your career, offering ample learning opportunities. My advice to future candidates is to be well-prepared on core technical topics and to manage time effectively during the aptitude test. Good luck!