How to reset or remove the BIOS password?

There are many ways to reset or remove the BIOS password:

  • By removing the CMOS battery
  • By using software
  • By using the MS-DOS command
  • By using motherboard jumper
  • By using Backdoor BIOS password

To reset the password, unplug the PC, open the cabinet and remove the CMOS battery for approx. 15-30 minutes and then put it back. It’ll reset all BIOS settings as well as the password and you’ll need to re-enter all settings. If it fails, then try to remove the battery for at least one hour.
On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covered, and place it over the two remaining jumpers.

BIOS passwords are used to add some extra security to computers. You can either set a password to prevent access to BIOS settings or to prevent PC from booting.

But sometimes this extra security might become a pain when you forget the BIOS password or someone changes your system BIOS password intentionally.

But there is no need to worry. There are many known ways to reset / remove / bypass the password:

  • By removing CMOS battery
  • By using motherboard jumper
  • By using MS DOS command
  • By using software
  • By using Backdoor BIOS password

Before attempting to reset or remove the BIOS password, it’s essential to be cautious and ensure you have a good understanding of the potential risks and consequences. If you are unsure or uncomfortable performing these steps yourself, Contact Nick Squires he is the leading expert of BIOS password.